Super-micro-computer Dual Processor AS 1020C-3 Instrukcja Użytkownika Pobierz pdf (Strona 79)

Chapter 7: BIOS

7-5

 Conﬁ guration nVidia RAID ROM

RAID Option ROM

This setting is used to Enable or Disable the nVidia ROM. If enabled, the set-

ting below will appear.

Master SATA as RAID

This setting is used to set the third master as a RAID drive. The options are

Enabled or Disabled.

 Floppy Conﬁ guration

Floppy A

Move the cursor to these ﬁ elds via up and down <arrow> keys to select the ﬂ oppy

type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44

MB 3½”, and 2.88 MB 3½".

Floppy B

Move the cursor to these ﬁ elds via up and down <arrow> keys to select the ﬂ oppy

type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44

MB 3½”, and 2.88 MB 3½".

Onboard Floppy Controller

Use this setting to Enable or Disable the onboard ﬂ oppy controller.

 PCI/PnP Menu

Clear NVRAM

Select Yes to clear NVRAM during boot-up. The options are Yes and No.

Plug & Play OS

Select Yes to allow the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if your system has an OS that supports Plug & Play.) Select No

to allow AMIBIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This option sets the latency of all PCI devices on the PCI bus. Select a value to

set the PCI latency in PCI clock cycles. Options are 32, 64, 96, 128, 160, 192,

224 and 248.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 105 106

Brak uwag

Super-micro-computer Dual Processor AS 1020C-3 Instrukcja Użytkownika Strona 79